Plotter Reflex

Plotter Reflex is a plotter cut, reflective film transfer with a polyester backing that meets the criteria in ISO 20471 and/or EN 17535 and is suitable for use on workwear in medium and high-risk situations.

Plotter Reflex is a good choice for smaller orders, personalized designs, and ad-hoc embellishment.

Note: Star rating is indicative of the performance capabilities or features of a product, with more stars implying higher performance or more advanced features.

Recommendations

Washing: Inside-out at max 90 °C. Wait at least 24 hours after application before first wash.
Ironing: Should be done inside-out at a low temperature.
Tumble drying: Should be done inside-out at a low temperature on the cotton cycle.
Foil removal: Hot peel.

Information

Safety-approved by Rådet for Sikker Trafik (a private organization working to improve traffic safety. It consists of dozens of recognized associations, municipalities, and government ministries) and may be used on clothing required to meet the criteria in EN 17535 (replaced EN 13356 in 2020) and/or EN ISO 20471.

Available in silver grey, only.

Its average thickness of 200 micron makes the cutting line easy to see.

An alternative to Plotter Reflex is our Water Reflex, which is available in any color but is not safety-approved.Plotter Reflex has been safety-approved by.

Plotter Reflex has been thoroughly tested by industrial launderers to determine tolerable washing thresholds.

These recommendations are applicable to our transfers, but not necessarily to the fabrics they are printed on

Working Environment Authority categorizes reflective clothing according to how much colored and reflective fabric the clothes consist of. Learn about categories and regulations for reflective clothing on Working Environment Authority's website (in Danish).